1 - Excellent resistant
2 - Resistant (usually OK for static seals)
3 - Relatively resistant (sometimes OK for static seals)
4 - Not resistant
X - No data
|Little to Minor Effect, 0 to 5% Volume Swell|
|Minor to Moderate Effect, 5 to 10% Volume Swell|
|Moderate to Severe Effect, 10 to 20% Volume Swell|
|No Data Available|
* Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. Tests have been performed under laboratory conditions and if not otherwise indicated by room temperature. Sealution BV assumes no responsibility whatsoever.
** The information contained in these tables was derived from several sources and is to be used as a general guide only. Compound selection based on this table only, used for any specific application without further consultation of Sealution B.V. technical staff rests solely by the end-user. Sealution BV assumes no responsibility whatsoever.